Electrician in Colongra, NSW
Electrical work in Colongra, NSW
Colongra sits near Lake Munmorah on the Central Coast, and Colongra Power Station is in the suburb, with Colongra Swamp Nature Reserve covering its northern and eastern parts. The lake is shallow, and its three main access areas are Colongra Bay Reserve, Elizabeth Bay and Tom Burke Reserve. Our work is on the property you call about, whether it is a home or a business. On a visit, the switchboard and the meter box on that property are the first things we check.
Before we book a visit, we need to know whether the gate or side fence is locked, where the meter box is, and who holds the key or the gate code. If the switchboard is in a garage or a shed, the shed has to be open on the day, and we need room to park a work vehicle on the driveway or the road outside. If the meter box is a long way from the house, tell us where it is when you call. If the owner is away, make sure the person with the key can be reached during the visit.
We cannot tell how old a home is from its address, so we check the switchboard and the wiring on the day. A home built before safety switches were common can have a fuse box, no safety switches, or old rubber-insulated cable that has dried out. A newer home can still have a poor job from an earlier owner, such as a circuit added without a safety switch. When you call, give us the year the home was built if you know it, because that year decides what we look for first.
What we do here most
Jobs we do in Colongra
These four jobs cover an after-hours fault, a fault that shows up in daily use, an old-wiring question and a safety check. Each one starts at the switchboard, so the visit is planned around how we reach it.
24/7 emergency electrical
Power off after dark with the neighbours still lit
If the power points and lights go dead at night, first look at whether the neighbouring homes still have power. If they do, the fault is most likely inside your own home or on the service cable from the street, and a phone call cannot fix either. We answer the phone at any hour, every day, so call us and tell us which rooms are dead. That tells us what to bring before we arrive.
electrical repairs
A power point that sparks when a fridge starts
A power point that gives a bang, a burning smell or a warm faceplate is a fault to stop before it spreads, so switch that circuit off at the switchboard and leave it off. We open the point, check its connections for heat marks, and trace the cable back toward the switchboard. If the house is older, the cable can run a long way and the fault can sit well away from the point itself.
home and building rewiring
An older house that needs rewiring room by room
Rewiring starts at the switchboard, where we check the main switch, the spare ways and the earthing before any new cable goes in. We then work room by room, so the rest of the house can stay in use while each room is worked on. Tell us the year the home was built, because that tells us whether to expect old cable or a newer job that still needs a safety check.
smoke detector testing and replacement
Smoke alarm chirping after a power cut
A smoke alarm that chirps about once a minute usually has a weak backup battery or has reached the end of its life. After a power cut, the alarm may have run on that battery for a while, so we test each unit, check its date, and replace any that are past their life. We also check whether each alarm is wired into the home's power or runs on a battery alone, because those are different jobs.
If it is urgent
If the power drops in Colongra after hours
- 1Step 1: Press the test button on each safety switch on the switchboard. A safety switch that trips when you press its test button is working, so switch it back on once. If it trips again straight away, leave it off and go no further.
- 2Step 2: Do not open the meter box, the switchboard covers, or any cable that is down, lying on the ground or hanging from a pole. Do not plug a generator into a power point, because it can feed back into the network and put line crews at risk.
- 3Step 3: When you call, tell us your street, whether the neighbouring homes still have power, which safety switch tripped or which circuit went dead, and whether the gate or the meter box is locked.
Common questions
Frequently Asked Questions
Do you work out of hours?
Yes. We are open 24 hours a day, every day, and we answer the phone at any hour. Urgent problems such as sparking outlets, burning smells and tripped circuits are part of our emergency electrical work.
Do you come to my home or business?
Yes. We travel to our customers, so we work at your home or business. This site does not list a street address.
Which areas do you cover?
We cover the Central Coast and Newcastle, NSW, and we are based in Kanwal. The list of suburbs on this site shows the places we work in.
What should I do before you arrive if the power is off?
First, check whether the power is off across the street or only at your place. Do not open the switchboard, and do not touch any wiring that is sparking, hot or wet. If you smell burning or see smoke, get everyone out and call emergency services first. When you call us, tell us what you have checked.
Do you give quotes?
Yes. Our process includes a quote. The steps run in this order: a first phone call, the quote, then the day of work and handover.
How much does the work cost?
The cost depends on the job, so this site does not publish figures. To get one, start with a first phone call, which leads to a quote.
How quickly can you get to me?
We do not promise a response time on this site, because it depends on the job and on where you are. We answer the phone at any hour, every day, so call us and describe the problem.
Do you work on rental properties?
Yes. Our test and tagging service covers rental properties. Our strata and real estate electrical maintenance is tailored for property managers, with routine inspections, emergency repairs and compliance checks.
Do you install battery storage?
Yes. Installing battery storage systems is part of our residential electrical work, alongside EV charging stations.
Do you work on older homes and old wiring?
Yes. We remove and replace old or unsafe wiring, including cloth or aluminium wiring. Our full property assessments look for risks, outdated wiring and safety concerns.
Do you work for businesses?
Yes. Our commercial electrical work includes wiring and rewiring for offices, shops, warehouses and communal buildings, along with switchboard upgrades and routine maintenance. We also test and tag plug-in appliances at workplaces.
Do you install EV chargers?
Yes. We install EV chargers for homes and businesses. We assess your property to work out where the charger should go, and the work can include load balancing, surge protection and switchboard upgrades where needed.
What services do you offer?
We do residential and commercial electrical work across the Central Coast and Newcastle. Our service pages list each type of work, including home rewiring, lighting, switchboard upgrades, smoke alarm testing, EV chargers, data cabling, test and tagging, and emergency repairs.
Do you test smoke alarms?
Yes. We test every smoke detector to check that it works and to check its battery life. We also install and replace smoke alarms, including interconnected ones.
Everything we do here
Services in Colongra, NSW
Each service below is carried out at the property itself, so the list works the same way for a Colongra home or business as it does anywhere else we work.
Local, and on the phone
Booking electrical work in Colongra
The detail that decides how we plan your visit here is how we get to the switchboard. Tell us whether the gate or the meter box is locked, and who holds the key or the gate code.
0468 084 63524 hours a day, 7 days a week
Not urgent? Send us the job instead